Showing posts with label Sealing. Show all posts
Showing posts with label Sealing. Show all posts

Thursday, 1 January 2015

Points to be Remember while Waterproofing Water Holding Structures

Fixed and portable tanks, reservoirs, filtration plants, water features and ponds are some typical structures that hold water. These water holding structures are subject to pressing water exposure constantly, particularly when they’re built as part of a new building, using standard building materials such as concrete and concrete block-work. Applying a waterproofing membrane to these areas is therefore crucial, especially underground tanks where detecting and repairing leaks is more challenging and expensive.

Most of the water holding structures are made of concrete or precast built which, over time undergoes shrinkage which leads to cracks in the substrate and subsequent leakage. Durotech has available a range of materials suitable for waterproofing tanks and water holding structures for a variety of purposes including water retention, potable (drinking) water and chemical resistance. There are some other points to be considered prior to waterproofing, please see below;

1.       It is critical to establish exactly what is required of the waterproofing membrane system before waterproofing, to ensure the correct procedure and products are used. For example, it must be identified if there’s any Hydrostatic resistance required, potable water certification or chemical resistance, UV exposure and fish among other factors because this will affect which membrane is most applicable to each given circumstance.

2.       Ensure all protective equipment/breathing apparatus is used, particularly in situations with limited ventilation.

3.       In case of underground tanks, partially buried tanks or marine tanks, it is important that the tank be treated from both in inside and outside (in much the same way as a retaining wall). The internal waterproofing will ensure that all water inside the tank remains inside the tank. External waterproofing is critical to ensure that no moisture can enter the tank from outside, which would create issues with the quality of water as well as creating hydrostatic or negative pressure which can push the membrane off the inside of the tank as the pressure builds up over time.

4.       The surface of the water structure should be dry and free of all contaminants prior to installation of system.

5.       Finally, it is recommended that a test are be waterproofed first, to ensure adequate adhesion of both the primer to the substrate, and the membrane to the primer. Please contact Durotech, or consult the Technical Data Sheets for products to be used for waterproofing inside & outside tanks and other water holding structures.

Sunday, 28 December 2014

Things to consider before selecting Waterproofing Membranes



Whether it’s a new build or an existing structure, all waterproofing applications should be installed by experienced, licensed waterproofing contractors. Our objective in this article is to make some useful recommendations for the things you may be unaware of on the subject of waterproofing.

Buy Waterproofing Membrane


1.         Evaluate the perimeter of your house: Make sure that the ground next to your foundation slopes is away from the foundation, and not towards it. Dirt which is installed as ‘Backfill’ around the foundation, typically at retaining walls, tends to compact over time and settle lower than the surrounding dirt, which is already packed and established. This causes the overall falls to slope towards the house, as opposed to away from it. If necessary/practical, add more dirt up against the foundation to create at least a 150mm per meter slope against the foundation. The top of the dirt should be at least 150mm below the sill plate so that there is no ground contact which can cause certain building materials to rot over time.
2.       Treat your walls with products such as Drylok or Xypex if you have minor leaks: Drylok is waterproofing compound, not a water sealer. It expands as it cures effectively to become part of the wall. Xypex is more akin to applying a waterproof concrete on the surface that bonds with it. Because Xypex relies on the presence of moisture to form its waterproof crystalline structure, if a Xypex application does have small areas of water penetration it would seal itself as it cycles through moisture. You should expect to pay up to 4 times as much for Xypex as you would for the Drylok system. The major limitation with these types of solutions is that groundwater which is underneath the basement floor or at the wall/floor junction will generally be built up with a significant amount of negative pressure, due to the weight of groundwater above it.
3.       Repair defects in walls such as cracks: If you notice a crack in a concrete wall, it may continue right through the wall to the outer surface and is a potential source of water penetration. Any cracks that are not subject to thermal or structural movement can be treated with DRYLOK Fast Plug, which is very effective in sealing cracks in masonry.
4.        Consider installing a sump: Simply put, this is a hole in your basement floor which contains a pump. When the water level in the sump rises too high, a pump kicks in and draws the water out of the sump, discharging it approximately 3m away from the residence.

Monday, 24 November 2014

Sydney Roof Maintenance and Management

Roof Repair

Your roof is a large portion of your home’s exterior that protects you and your family from outside weather conditions. Due to an ever changing environment, your roof continually subject to weathering. The majority of Australians are unaware of the condition of their roof. A leaking roof left unrepaired can lead to serious damage. Signs of leaks include water entry, wet insulation, stains or mould. So don’t wait for a problem to appear, fix it before it happens.

At Durotech industries, we can provide a modern roofing look using the latest roof seal coatings that will extend your roof’s life.  We provide a wide range of roof repairs and services to protect your building or home, including roof leak repair and tile roof repairs. So if you are worried about the condition of your roof and looking for a reliable, professional and friendly roof repair company in Sydney, then you have come to the right place.

Our Services

·         Roof Restoration
·         Rooftops Repairs
·         Sealing
·         Tiling

Why Choose Us?

·         Qualified Roofing Tilers
·         30 Years in the Business
·          Leak detection and prevention
·         Waterproofing to flat roofs
·         Residential and Commercial Properties

Thursday, 20 November 2014

Commercial and Residential Waterproofing


Durotech Industries is an independent company providing professional level of services of waterproofing throughout Sydney and NSW. As experienced water proofers, we use best suited products to each individual project based on our knowledge and expertise. Our goal is to provide waterproofing, concrete repair and structural remediation applications to predominately the commercial, industrial and infrastructure sectors of the Australian marketplace. Our focus is to bring up-to-date technology and believe using the very best technologies and eco-friendly materials.

http://www.durotechindustries.com.au/about/

 Waterproofing of below ground structures and water retaining structures can only be achieved by careful design plus professional workmanship with quality control on site. 

Why choose us?
·         We use high performance waterproofing membranes to provide the best solution.
·         Our products include flexible and liquid membranes for internal and external applications.
·         All process is supported by certified applicators.

Our team
Our professionals are passionate in their approach to waterproofing and complete every project as if it was their own. With a wealth of knowledge about products, we are committed to completing all projects to the highest standards on time and on budget. We aim to ensure a safe working environment to complete your projects smoothly and on time whatever the size.